A thorough safety check and basic tune for bikes that are in reasonable condition but need a once-over.

• Check and tighten key bolts
• Basic brake and gear adjustment
• Tyres checked and inflated
• General safety inspection

Ideal if you want to know the bike is safe and working as it should.

A more in-depth service for bikes that see regular use.

• Full safety check
• Brakes and gears adjusted and set up accurately
• Wheels checked and minor true where needed
• Headset, bottom bracket and hubs checked for play
• Tyres, chain and cassette inspected for wear

Recommended as a regular service for most riders.

Our annual larger service for heavily used bikes or those that have not been serviced in a while.

• Everything in the Essential Service
• More detailed drivetrain clean and reset
• Hubs and bearings inspected and adjusted where possible
• Cables checked and replaced where needed (parts extra)
• More extensive strip, clean and rebuild of key components

A full strip and rebuild to get your bike riding as close to new as possible.

• Full strip-down of the bike
• Deep clean of frame, drivetrain and components
• Re-grease and reassemble with fresh lubrication and correct torque settings
• Full setup of gears, brakes and bearings

Recommended every 12–24 months for high-mileage riders or before big events and trips.

A full safety and function check for children’s bikes.

• Brakes and gears (if fitted) checked and adjusted
• Tyres, wheels and bearings inspected
• Bolts checked and tightened

Provides peace of mind that everything is safe and working correctly.

Ideal if you are unsure what level of service is required.

• We inspect the bike
• Discuss how you use it
• Recommend the right level of service
• Provide a clear quote before any work goes ahead

Professional packing of your bike into a hard travel case.

• Bike assessed before packing
• Partial disassembly as required for the case
• Key components protected and secured
• Packed carefully for onward travel

Careful packing of your bike into a soft travel case with additional protection where needed.

• Bike assessed before packing
• Partial disassembly as required
• Extra care taken around frame, fork, rear mech and contact points
• Packed for travel using the protection available within the case

A little more time is needed to protect the bike properly.

A pre-travel check and packing service for riders who want the bike looked over before it goes in the case.

• Safety and function check
• Brake and drivetrain check
• Torque and alignment check
• Packing into your chosen travel case

Recommended before flights, events and longer trips where peace of mind matters.

Travel cases must be supplied in good, usable condition unless otherwise agreed in advance.

• We pack with care and experience, but we do not control airline or third-party handling once the bike has left us
• You are responsible for checking airline rules, baggage limits and any bike transport requirements before travel
• If damage occurs during transit, it should be reported before leaving the airport
• If you are unsure what to book, choose Free Assessment & Quotation and we will advise you

Set up and adjust front and rear brakes, check pad wear and test operation.

Fit new rim brake pads, align to the braking surface and check braking performance. Pads are charged separately.

Fit new disc pads, align the caliper and test braking. Pads are charged separately.

Supply and fit a new inner cable for one brake, then set up and test.

Supply and fit new inner and outer cable for one brake, then set up and test.

Full bleed of hydraulic brake(s), reset lever feel and check function. Fluid and small parts are charged separately if required.

Index and set up gears for clean, accurate shifting on front and rear where fitted.

Remove and replace chain, size correctly and check shifting. Chain is charged separately.

Swap cassette or freewheel and check gear operation. Parts are charged separately.

Align a bent derailleur hanger to improve shifting and reduce noise.

Fit a new hanger and re-set the rear derailleur. Hanger is charged separately.

Strip and clean drivetrain components where appropriate, degrease, re-lubricate and re-set for smoother running.

Bring in your chain and we will inspect, prepare and hot wax it so it is ready to refit at home.

Ideal for riders wanting to try waxing or maintain a second chain rotation setup.

View Chain Waxing Services

Join our Intro to Chain Waxing session

Bring in the bike and we will remove the chain, inspect wear, prepare and hot wax it, then refit and carry out a basic gear check.

The bike leaves ready to ride with a cleaner, quieter drivetrain and a fresh starting point.

Supply your chosen new chain or purchase one through us. We will size it, prepare it, hot wax it and fit it correctly.

Recommended when the current chain is worn or when starting a waxing system properly from scratch.

Two customer chains prepared and hot waxed together.

Ideal for higher mileage riders running a chain rotation system for easier maintenance and longer drivetrain life.

Remove wheel, replace inner tube, refit tyre and check for obvious causes of the puncture. Tube is included in the price.

Fit or replace a standard clincher tyre. Tube and tyre are charged separately.

Install tubeless valve, fit tyre, add sealant and seat the tyre. Valves, sealant and tape are charged separately if required.

Remove and replace a tubeless tyre on a prepared rim that is already set up for tubeless.

True a wheel for lateral and radial runout and balance spoke tension where the condition of the wheel allows.

Replace a broken spoke, tension the wheel and true it.

Build one wheel from hub, spokes and rim. Parts are supplied separately.

Build a pair of wheels from hubs, spokes and rims. Parts are supplied separately.

Inspect, clean and re-grease a serviceable bottom bracket, or replace where appropriate. Parts are charged separately.

Fit a new bottom bracket and check for smooth running. Parts are charged separately.

Strip, clean, re-grease and reassemble a headset. Parts are charged separately if needed.

Fit and set up a new headset. Parts are charged separately.

Strip, clean, re-grease and adjust a front hub. Bearings and parts are charged separately.

Strip, clean, re-grease and adjust a rear hub. Bearings and parts are charged separately.

Adjust hub bearings to remove play and improve smoothness.

Replace pivot bearings on full-suspension frames. Bearings are charged separately.

We can quote for fork and rear shock services based on the specific model and condition. Please book a Free Assessment & Quotation or contact us for details.

For custom work and any jobs not listed above. We will always agree this with you in advance.

Remove old tape and fit new bar tape. Tape is charged separately unless supplied as part of a package.

Lights, mudguards, racks, computers and other accessories. Final price depends on complexity and will be confirmed before work starts.

Fit and adjust full-length or clip-on mudguards. Final price depends on bike and guard type.

Applied where a bike arrives heavily soiled and requires significant cleaning before work can start. This will always be discussed with you first.

Inspection and written report to support an insurance claim, for example after a crash or incident.